Valley Bevelling CorporationProducts: Glass, mirror, bevelled glass, bevelled mirror, table tops, shelves, art glass, plate grooves, finger pulls, sandblasting, door inserts, cabinet door inserts,
bevelled mirror strips, supplies, wall mirrors, glue chip glass, tempered glass, laminated glass, annealed glass, adhesives, glass drilling, glass edging, and much more.
Valley Bevelling CorporationCustom Machine Bevelling and Edging
| Straight Line Bevelling | |
| Width of Bevel (approx.) | Angle of bevel (approx.) |
| !/2 inch | 12 degrees |
| 3/4 inch | 8 degrees |
| 1 inch | 6 degrees |
| 1 1/4 inch | 5 degrees |
| 1 1/2 inch | 4 degrees |
| 2 inch | 4 degrees |
The above bevel widths and angles are for our standard custom bevelling. Other sizes and angles can be performed on request. Standard bevelling is on glass or mirror 3/16" or more in thickness and 4" x 6" to 72" x 100". Please call for capabilities outside of these parameters. Bevelling on 3/16" and 1/4" glass and mirror includes a satin pencil polished edge. Edgework on thicker glass must be specified separately.
| Shape Bevelling | |
| Bevel Width (approx.) | Bevel Angle (approx.) |
| 1/2 inch | 12 degrees |
| 3/4 inch | 8 degrees |
| 1 inch | 6 degrees |
| 1 1/4 inch | 5 degrees |
| 1 1/2 inch | 4 degrees |
Standard shape bevelling is performed on inside, outside, and multiple curves with a minimum of 2" radius. Please send a drawing to determine capabilities outside of these parameters.
Straight Line and Shape Edging
The following types of edgework are available both straight line and shape on all of the thicknesses of glass and mirror offered by Valley Bevelling. Different edgework may be applied to different edges on the same piece of glass or mirror.
Seam - A rough grind is applied to the top and bottom edges to remove the sharpness. This is not a decorative edge and is used primarily for safety purposes where the glass or mirror edge will not be visable.
Satin Flat Polish - The edge is finely ground straight and an arris is applied to the top and bottom. The finish has an opaque milky look and is used as a decorative edge when this appearance is required or when economy is important.
Satin Pencil Polish - The edge is finely ground with a slight curve. The finish has an opaque milky look and is used as a decorative edge when this appearance is required or when economy is important.
High Flat Polish - A highly polished straight edge is applied with a polished arris top and bottom. This is a glossy decorative finish commonly used for table tops and shelving.
High Pencil Polish - A highly polished edge with a slight radius. This is a glossy decorative finish commonly used for table tops and shelving.
Chipped Edge - Random vertical chips are applied to the edge for a dramatic glossy finish commonly used for table tops and shelving.
Rope Edge - Chips are applied to the edge alternately from the top and bottom. The resulting edge is an unusual decorative finish used for table tops.
Return to: Valley Bevelling
Return to: Crystal-City
Copyright © 1999 Valley Bevelling Corporation.. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Products: Glass, mirror, bevelled glass, bevelled mirror, table tops, shelves, art glass, plate grooves, finger pulls, sandblasting, door inserts, cabinet door inserts,
bevelled mirror strips, supplies, wall mirrors, glue chip glass, tempered glass, laminated glass, annealed glass, adhesives, glass drilling, glass edging, and much more.
